Description
This Thunderbolt™ 3 cable is universally applicable and combines all the advantages of the Thunderbolt™ 3 interface. It allows the connection of different devices such as external enclosures, monitors, card readers and docking stations via a Thunderbolt™ 3 port of a PC or laptop. The cable provides data transfer rates of up to 20 Gb/s and supports USB, Displayport, PCI Express as well as Ethernet data transfer. The connection of a 5K or a 4K Displayport monitor is possible, as is the connection of USB 3.1 Gen 2 devices. Furthermore the cable enables the power supply of connected devices with up to 100 W.
Specification
• Connector:
1 x Thunderbolt™ 3 USB Type-C™ 24 pin male >
1 x Thunderbolt™ 3 USB Type-C™ 24 pin male
• Chipset: Cypress E-Marker
• Cable gauge:
32 + 34 AWG data line
24 + 34 AWG power line
• Cable diameter: ca. 4.4 mm
• Conductors: 8 x coaxial for SuperSpeed USB, 1 x Twisted Pair for USB 2.0
• Gold-plated connector
• Triple shielded cable
• Data transfer rate:
Thunderbolt™ 3 up to 20 Gb/s
Displayport 1.2a up to 21.6 Gb/s
SuperSpeed USB up to 10 Gb/s
Thunderbolt™ Networking up to 10 Gb/s (Peer-To-Peer)
• Display resolution up to:
1 x 5120 x 2880 30 Bit @ 60 Hz or
1 x 4096 x 2160 30 Bit @ 60 Hz
(depending on the system and the connected hardware)
• Supports data and video on a single cable
• Supports PCI Express 3.0 protocol (4 lanes)
• Supports Displayport 1.2a protocol (8 lanes, HBR2 and MST)
• Daisy Chain up to 6 Thunderbolt™ devices (cascadable)
• Dual channel, bi-directional data transfer
• Power supply via USB Power Delivery up to 100 W (20 V / 5 A)
• Power supply for Thunderbolt™ 3 devices with bus power (max. 15 W)
• Colour: black
• Length without connector: ca. 1.0 m
System requirements
• PC or laptop with a free Thunderbolt™ 3 port
Package content
• Thunderbolt™ cable
Package
• Retail Box
Garantie: 12 luni

Kit de montare pentru Raspberry Pi 10 mm - 18214
Placa PCI Expressx1 la 2xPCI 32Bit 5 V cu cablu flexibil 9 cm, insertie stanga-41341
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 100 cm - 83804
Rama de instalare Slim SATA 5.25 inch pentru 1 x HDD 2.5 inch SATA HDD cu max. 9.5 mm - 62669
Modul M.2 cheie A+E tata la WLAN 11ac/a/b/g/n + Bluetooth 4.0 - 95254
Adaptor M.2 cheie M tata la slot M.2 cheie A - 65699
Cablu antena TNC Plug la SMA Plug RG-58 C/U 10 m - 89507
Cablu antena TNC Plug la SMA Plug RG-58 C/U 7.5 m - 89508
Cablu antena N Plug la RP-SMA Plug 90 grade CFD200 0.3 m pierdere mica - 89578
Switch HDMI 3 - 1 bidirectional - 87619
Cablu antena TNC Plug la SMA Plug CFD200 7.5 m pierdere mica - 89499
Adaptor M.2 NGFF la SATA 7 pin - 62517
Cablu USB3.0 A tata -B tata 1m - 82580
Riser Placa Mini PCI Express - la PCI Express, insertie stanga-41305
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84239
Adaptor Raspberry Pi GPIO Pin Header la Serial RS-232 - 65628
Cablu USB 3.0 -A-B tata - tata 1m Premium-82756
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama drept 30 cm - 84852
Cablu USB 3.0 -A-B tata - tata 2m Premium-82757
Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-68 compatibil Plug 350 mm 1.13 lungime filet 10 mm - 88417
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in jos 30 cm - 84854
Cablu antena N Plug la SMA Plug RG-58 A/U 10 m - 89466
Cablu USB 3.0 A - B tata - tata 5m albastru - 82582
Adaptor M.2 la 2 x RJ45 Gigabit LAN -40 grade la 85 grade C (PCIe) - 62754
Adaptor Micro USB mama la Terminal Block 6 Pin - 65517
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Placa PCI Express cu 2 x Serial RS-232 + 1 x Paralel - 89556
Cablu USB3.0 A-B tata-tata - 82434
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata – mama (5 V + 12 V) 50 cm - 84361
Modul Keystone USB 3.0 A mama la USB 3.0 A mama - 86319
Placa PCI Express cu 2 porturi USB 3.0 - 89241 






Recenzii
Nu există recenzii până acum.