Rack extern (carcasa) 2 x M.2 cheie B la USB 3.1 Gen 2 cu RAID – 42568

Description
The aluminium enclosure enables the installation of two M.2 SSD in 2280, 2260, 2242 and 2230 format, which can be connected via USB Type-C™ to the PC or laptop. When using more than one SSD, there is the possibility to use different RAID level.

Note
The package contains the cable USB-C™ male to USB Type-A male. This can also be used only in this direction. Therefore the USB-C™ male must be connected to the computer and the USB Type-A male to the enclosure.
Optionally there is a cable from Delock USB Type-A male to USB Type-A male (83981), so that this enclosure can also be connected to a computer with USB Type-A interface. In addition, there is the possibility to connect a power supply if the power from the USB port is not enough.

Specification
• Connector:
  external:
    1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A female
    1 x 5 V DC jack
  internal:
    2 x 67 pin M.2 key B slot
• Interface: SATA
• Chipset: Asmedia ASM1352R
• Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key B+M
  based on SATA
• Maximum height of the components on the module: 1.5 mm application of
  double-sided assembled modules supported
• Supports RAID 0, 1, SPAN, Port Multiplier
• RAID mode set by DIP switch on board
• Data transfer rate up to 10 Gbps
• Enclosure with full-PCB
• Colour: silver
• Dimensions (LxWxH): ca. 136 x 80 x 16 mm
• Hot Plug, Plug & Play

Specification of the power jack
• 5 V, ground outside, plus inside
• Dimensions:
  inside: ø ca. 1.35 mm
  outside: ø ca. 3.5 mm
  length: ca. 8.5 mm
• Optional power supply: product code 41337

System requirements
• Windows 7/7-64/8.1/8.1-64/10/10-64, Linux Kernel 3.19, Mac OS 10.11
• PC or laptop with a free USB Type-C™ or Thunderbolt™ 3 port

Package content
• External enclosure
• Cable USB-C™ male to USB Type-A male, length ca. 50 cm
• Cover, screwdriver, screws
• User manual

Package
• Retail Box

Garantie: 12 luni