Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82022MU GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Antena cablu SMA Jack Bulkhead > MHF/U.FL compatibil Plug 200 mm - 88419
Cablu antena N Plug la SMA Plug cu doua conductoare RG-58 A/U 10 m - 89468
Cablu antena TNC Plug la SMA Plug RG-58 C/U 2.5 m - 89510
Tester PoE mod A / B - 62860
Convertor 2.5 inch U.2 SFF-8639 la M.2 NGFF NVMe Key M - 62710
Cablu USB 3.0 -A-B tata - tata 2m Premium-82757
Cablu antena SMA Jack Bulkhead > MHF/U.FL compatibil Plug 500 mm - 88418
Cablu USB3.0 A tata -B tata 1m - 82580
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 100 cm - 83804
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Cablu antena RP-SMA Jack Bulkhead la MHF / U.FL-LP-068 compatibil Plug 100 mm 1.13 lungime filet 9 mm rezistenta la stropire - 89584
Cutie Keystone de montare la suprafata cu opt porturi - 86209
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Rack Mobil 5.25 inch pentru 4 HDD-uri/SSD-uri SATA 2.5 inch - 47220
Placa PCI Express - 2x USB 3.0 - 89243
Cablu prelungitor (extensie) SATA 20cm - 84362
Cablu antena TNC Plug la SMA Plug CFD200 5 m pierdere mica - 89505
Adaptor mSATA la M.2 NGFF - 62592
Cablu antena TNC Plug la SMA Plug RG-58 C/U 5 m - 89509
Cablu antena N Plug la SMA Plug RG-58 A/U 10 m - 89466
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in jos 30 cm - 84854
Placa PCI Expressx1 la 2xPCI 32Bit 5 V cu cablu flexibil 9 cm, insertie stanga-41341
Cablu USB 3.0 -A-B tata - tata 1m Premium-82756
Patch Panel Desktop cu 12 porturi Cat.6 negru - 87296
Riser placa Mini PCI Express la PCI Express x 1 insertie stanga 13 cm - 41370
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Receptor GPS pe serial MD6 PPS model NL-8005P GNSS u-blox 8 5 m - 62526 
Recenzii
Nu există recenzii până acum.