Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82022MU GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu antena RP-SMA Jack Bulkhead > MHF /U.FL-LP-068 compatibil Plug 200 mm 1.13 lungime filet 9 mm rezistent la stropire - 89511
Antena GPS mufa SMA NL-200AA 15 m - 60521
Riser placa Mini PCI Express la PCI Express x 1 insertie stanga 13 cm - 41370
Kit de montare cu distantiere M2.5 hexagonale interior/interior 30 mm pentru Raspberry Pi - 18220
Cablu USB 3.0 A - B tata - tata 0.5 m negru - 85065
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Panou 19 inch cu 24 porturi Cat.6A negru - 43320
Cablu USB 3.0 A-B tata - tata 5m Premium - 82759
Cablu USB 3.0 A tata - B tata 3m - 82581
Cablu antena TNC Plug la SMA Plug CFD200 5 m pierdere mica - 89505
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 5 m - 89513
Convertor Raspberry Pi USB Micro-B mama / USB Pin Header la SATA 7 Pin - 62626
Cablu USB 3.0 -A-B tata - tata 2m Premium-82757
Cablu antena RP-SMA Jack Bulkhead la MHF / U.FL-LP-068 compatibil Plug 100 mm 1.13 lungime filet 9 mm rezistenta la stropire - 89584
Cablu antena N Plug la SMA Plug cu doua conductoare RG-58 A/U 10 m - 89468
Receptor GPS pe USB 2.0 NL-802M2U Multi GNSS u-blox 8 4.5 m - 62532 
Recenzii
Nu există recenzii până acum.