Description
GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses TTL 3.30 V. Several integrated sensors allow position determination without GNSS signals.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS module!
Specification
• Connector: WTB serial TTL
• u-blox NEO-M8U module
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602.5625 ~ 1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online/offline,
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max.: –160 dBm
• LED-indicator for GPS status
• Operating temperature:
-40 °C ~ 85 °C without battery
-20 °C ~ 60 °C with battery
• Power supply: 5 – 48 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy:
2.5 m CEP (Circular Error Probable)
2.0 m CEP with SBAS (Circular Error Probable)
• Dimension (LxWxH): ca. 30 x 30 x 7.90 mm
System requirements
• Device with a free TTL 3.3 V connector
Package content
• Engine module
• Support CD
Package
• Box
Garantie: 12 luni

Cablu SATA 6 Gb/s 7 pin mama + alimentare 4 pin tata > Slim SATA 13 pin mama 30 cm - 84848
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 10 cm - 83802
Memorie Flash Mini PCIe mSATA 6 GB/s 16 GB intre -40 si +85 grade - 54706
Adaptor DC 5.5 x 2.1 mm tata la Terminal Block cu buton de comanda 2 pin - 65523
Adaptor 3.5 inch 4 X SATA 7 pin > 4 X M.2 NGFF - 62574
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853 
Recenzii
Nu există recenzii până acum.