Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-068 compatibil Plug 100 mm lungime filet 9 mm rezistent la stropire - 89482
Placa PCI Express Card cu 4 porturi externe USB 3.0-A (Quad Channel)-89325
Cablu prelungitor (extensie) SATA 20cm - 84362
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Cablu USB3.0 A-B tata-tata - 82434
Cablu USB 3.0 A tata - B tata 3m - 82581
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Cablu antena N Plug la SMA Plug RG-58 A/U 10 m - 89466
Kit de montare pentru Raspberry Pi 30 mm - 18215
Kit montare Keystone cu 4 porturi pentru birou 80 mm alb - 86282
Panou 10 inch pentru organizarea cablurilor negr - 43342
Adapter M.2 Key M male > M.2 Key E slot - 65831
Placa PCI Express Card cu 3 x porturi externe si 1 port intern pe USB 3.0-89301
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84239
Rama de instalare slim SATA 5.25 inch pentru 1 x HDD 2.5 inch SATA - 61993
Cablu antena TNC Plug la SMA Plug CFD200 5 m pierdere mica - 89505
Cablu SATA Totul in Unul (All-in-One) - 84230
Cablu antena N Plug la SMA Plug cu doua conductoare RG-58 A/U 10 m - 89468
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in jos 30 cm - 84851
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata – mama (5 V + 12 V) 50 cm - 84361
Placa PCI Express cu 4 x Serial RS-232 - 89557
Adaptor M.2 NGFF la SATA 7 pin - 62517
Receptor GPS NL-82002U Multi GNSS UDR u-blox NEO-M8U 1.5 m pe USB 2.0 - 62756 
Recenzii
Nu există recenzii până acum.