Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu antena RP-SMA Jack Bulkhead > MHF /U.FL-LP-068 compatibil Plug 200 mm 1.13 lungime filet 9 mm rezistent la stropire - 89511
Adapter M.2 Key M male > M.2 Key E slot - 65831
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in jos 30 cm - 84851
Convertor Digital Audio Coaxial la TOSLINK - 62790
Cablu SATA Totul in Unul (All-in-One) - 84230
Cablu antena RP-SMA jack bulkhead la MHF/ U.FL-LP-068 compatibil plug 100 mm lungime filet 10 mm - 89471
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 7.5 m - 89512
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84239
Convertor USB 2.0 tata la Serial-TTL 6 fire 1.8 m (5 V) - 83116
Cablu USB 3.0 A - B tata - tata 0.5 m negru - 85065
Modul Flash SATA 6 Gb/s 32 GB MLC Low profile - 54659
Adaptor M.2 NGFF la SATA 7 pin - 62517
Cablu antena N plug la SMA plug cu doua conductoare RG-58 A/U 5 m - 89467
Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-068 compatibil Plug 100 mm lungime filet 9 mm rezistent la stropire - 89482
Convertor M.2 cheie A+E tata la 1 x slot Mini PCIe half size / full size cu cablu flexibil - 62848
Modul Flash SATA 6 Gb/s 16 GB vertical - 54655
Riser Placa Mini PCI Express - la PCI Express, insertie stanga-41305
Rack mobil (Carcasa) pentru 1x HDD 2.5 inch SATA - 47192
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata – mama (5 V + 12 V) 50 cm - 84361
Cablu USB 3.0 A - B tata - tata 5m albastru - 82582
Cablu prelungitor (extensie) SATA 20cm - 84362
Adaptor 3.5 inch 4 X SATA 7 pin > 4 X M.2 NGFF - 62574
Cablu USB 3.0 A tata - B tata 3m - 82581
Adaptor VHDCI-68 pin tata > 4 x HDMI mama 20 cm - 65648
Modul Keystone RCA mama la RCA mama cu conectori auriti, galben - 86309
Cablu USB 3.0 -A-B tata - tata 1m Premium-82756
Modul Keystone HDMI mama la HDMI mama - 86316
Convertor USB 2.0 tata la Serial - TTL 3.5 mm 3 pin stereo jack 1.8 m (5 V) - 83115
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 10 cm - 83802
Incarcator 1 x USB Tip A 5 V 2.4 A alb - 62849
Kit de montare pentru Raspberry Pi - 18211
Rama instalare aluminiu de la 2.5 inch la 3.5 inch albastra - 21291
Kit de montare cu distantiere M2.5 hexagonale interior/interior 10 mm pentru Raspberry Pi - 18218
Adaptor M.2 cheie M la SFF-8643 NVMe - 62721
Cablu SATA 22pin_22pin mama-mama 20cm - 84406
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 100 cm - 83804
Rama de instalare Slim SATA 5.25 inch pentru 1 x HDD 2.5 inch SATA HDD cu max. 9.5 mm - 62669
Set clips-uri reparatie RJ45 4 culori - 86421
Adaptor PS/2 mama > USB-A tata - 65461
Cablu RJ45 Cat.6 SSTP unghi / unghi 2 m - 83522
Priza de perete cu 2 porturi RJ45 Cat.6 - 86269 
Recenzii
Nu există recenzii până acum.