Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Convertor M.2 cheie B+M tata la 2 x USB 3.0 Pin Header - 62843
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Placa PCI Express cu 2 x porturi interne pe USB 3.0 - 89272
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Modul Keystone Stereo jack 3.5 mm mama la Stereo jack 3.5 mm mama - 86322
Adaptor M.2 la 2 x RJ45 Gigabit LAN -40 grade la 85 grade C (PCIe) - 62754
Cablu SATA 22pin_22pin mama-mama 20cm - 84406
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in jos 30 cm - 84854
Rack mobil 5.25 inch pentru HDD SATA 3.5 inch - 47199
Cablu antena N plug la SMA plug CFD200 15 m pierdere mica - 89516
Convertor 2.5 inch U.2 SFF-8639 la M.2 NGFF NVMe Key M - 62710
Kit de montare pentru Raspberry Pi - 18211
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84239
Cablu USB3.0 A-B tata-tata - 82434
Adaptor M.2 cheie B tata la SATA 7 pin - factor forma 2242 - 62876
Antena cablu SMA Jack Bulkhead > MHF/U.FL compatibil Plug 200 mm - 88419
Cablu antena TNC Plug la SMA Plug CFD200 5 m pierdere mica - 89505
Cablu antena N Plug la RP-SMA Plug 90 grade RG-174 0.3 m - 89579
Cablu antena TNC Plug la SMA Plug CFD200 7.5 m pierdere mica - 89499
Cablu antena TNC Plug la SMA Plug RG-58 C/U 5 m - 89509
Riser placa PCI in unghi de 90 grade insertie stanga cu cablu de 13 cm - 41779
Cablu prelungitor (extensie) SATA 20cm - 84362
Receptor GPS serial MD6 PPS Multi GNSS NL-8004P u-blox 8 5 m - 62527 
Recenzii
Nu există recenzii până acum.