Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu RJ45 Cat.6 SSTP unghi / drept 0.5 m - 83524
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 2,5 m - 89514
Cablu USB 3.0 A tata - B tata 3m - 82581
Kit de montare cu distantiere M2.5 hexagonale interior/interior 30 mm pentru Raspberry Pi - 18220
Cablu USB 3.0 A - B tata - tata 0.5 m negru - 85065
Adaptor Raspberry Pi GPIO Pin Header la Serial RS-232 - 65628
Cablu RJ45 Cat.5e SFTP unghi / drept 1 m - 83515
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84356
Cablu antena SMA jack bulkhead la MHF/ U.FL-LP-068 compatibil plug 50 mm - 89480
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama drept 30 cm - 84852
Adaptor M.2 la 2 x RJ45 Gigabit LAN -40 grade la 85 grade C (PCIe) - 62754
Cutie de imbinare pentru cablu de retea Cat.6A LSA - 86243
Cablu SATA Totul in Unul (All-in-One) - 84230
Adaptor M.2 cheie M tata la slot M.2 cheie A - 65699
Adaptor M.2 NGFF la SATA 7 pin - 62517
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata – mama (5 V + 12 V) 50 cm - 84361
Modul Keystone BNC mama la BNC mama - 86301
Convertor M.2 cheie B+M tata la Hibrid 4 x SATA 7 pin tata cu RAID - 62850
Cablu USB3.0 A-B tata-tata - 82434
Cablu USB3.0 A tata -B tata 1m - 82580
Riser placa PCI Express x16 in unghi 90 grade, insertie stanga 2 U - 41767
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Switch cu 4+1 porturi 10/100 Ethernet PoE+ - 87682
Cablu antena RP-SMA Jack Bulkhead la MHF / U.FL-LP-068 compatibil Plug 100 mm 1.13 lungime filet 9 mm rezistenta la stropire - 89584
Convertor Raspberry Pi USB Micro-B mama / USB Pin Header la SATA 7 Pin - 62626
Kit de montare cu distantiere M2.5 hexagonale interior/interior 10 mm pentru Raspberry Pi - 18218
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84239
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in jos 30 cm - 84851
Riser placa PCI Express x16 BTX, insertie dreapta - 41788
Kit de montare pentru Raspberry Pi - 18211
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853
Cablu prelungitor (extensie) SATA 20cm - 84362
Adaptor Stereo jack tata 3.5 mm la Terminal Block 2 pin - 65528
Rama de instalare slim SATA 5.25 inch pentru 1 x HDD 2.5 inch SATA - 61993
Cablu antena TNC Plug la SMA Plug CFD200 10 m pierdere mica - 89498
Adaptor M.2 NGFF cheie B+M tata > M.2 NGFF cheie B slot port saver - 62549
Cablu antena TNC Plug la SMA Plug CFD200 2.5 m pierdere mica - 89506
Cablu USB 3.0 A - B tata - tata 5m albastru - 82582
Kit de montare pentru Raspberry Pi 10 mm - 18214
Antena cablu SMA Jack Bulkhead > MHF/U.FL compatibil Plug 200 mm - 88419
Cititor de carduri pe micro USB OTG cu 6 sloturi - 91732
Cititor de carduri pe USB 3.0 All in 1 - 91704
Adaptor VHDCI-68 pin tata la 4 x VGA mama 22 cm - 65647
Placa PCI Express x4 cu 1 port extern USB Tip C mama + 1 port extern USB 3.1 Gen 2 Tip A mama - 89562
Placa PCI Expressx1 la 2xPCI 32Bit 5 V cu cablu flexibil 9 cm, insertie stanga-41341
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 5 m - 89513
Convertor Raspberry Pi USB Micro-B mama / USB pin header la mSATA 6 Gb/s - 62648
Hub Intern USB 3.0 cu 4 Porturi - 61833
Adaptor M.2 NGFF la SATA 7 pin - 62548
Cablu Micro USB OTG tata la USB A tata + cititor de carduri Micro SD - 91709
Rama de instalare Slim SATA 5.25 inch pentru 1 x HDD 2.5 inch SATA HDD cu max. 9.5 mm - 62669
Adaptor M.2 cheie M la SFF-8643 NVMe - 62721 
Recenzii
Nu există recenzii până acum.