Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu antena RP-SMA Jack Bulkhead > MHF /U.FL-LP-068 compatibil Plug 200 mm 1.13 lungime filet 9 mm rezistent la stropire - 89511
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Cablu SATA 22pin_22pin mama-mama 20cm - 84406
Cablu prelungitor (extensie) SATA 20cm - 84362
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 100 cm - 83804
Adaptor M.2 NGFF cheie B+M tata > M.2 NGFF cheie B slot port saver - 62549
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84239
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 7.5 m - 89512
Set 4 buc. capac Keystone alb cu orificiu D - 86315
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84356
Cablu SATA 6 Gb/s 7 pin mama + alimentare 4 pin tata > Slim SATA 13 pin mama 30 cm - 84848
Adaptor PS/2 mama > USB-A tata - 65461
Kit de montare pentru Raspberry Pi - 18211
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853
Riser Placa Mini PCI Express la PCI 32 Bit / 5 V insertie stanga-41359
Cablu USB3.0 A-B tata-tata - 82434
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Cablu USB 3.0 -A-B tata - tata 1m Premium-82756
Cablu USB3.0 A tata -B tata 1m - 82580
Cablu antena N Plug la RP-SMA Plug 90 grade RG-174 0.3 m - 89579
Modul SP DOM SATA 6 Gb/s 64 GB MLC - 54657
Adaptor M.2 cheie M la SFF-8643 NVMe - 62721
Cutie Keystone de montare la suprafata cu sase porturi - 86227
Cititor de carduri FireWire B pentru Compact Flash - 91694
Convertor M.2 cheie B+M tata la 1 x USB 3.0 Pin Header - 62842
Adaptor M.2 NGFF la SATA 7 pin - 62548
Splitter HDMI 1 x HDMI intrare la 2 x HDMI iesire 4K - 87701
Incarcator auto 2 x USB tip A cu Qualcomm Quick Charge 3.0 - 62739
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in jos 30 cm - 84851
Kit de montare cu distantiere M2.5 hexagonale interior/interior 30 mm pentru Raspberry Pi - 18220
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 5 m - 89513
Riser placa PCI Express x16 in unghi 90 grade, insertie stanga 2 U - 41767
Cablu antena SMA Jack Bulkhead > MHF/U.FL compatibil Plug 500 mm - 88418
Adaptor M.2 NGFF M tata la PCI Express x 4 slot-uri - 62584
Cablu USB 3.0 -A-B tata - tata 2m Premium-82757
Riser placa Mini PCI Express la PCI Express x 1 insertie stanga 13 cm - 41370
Panou 10 inch pentru organizarea cablurilor gri - 43341
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 10 cm - 83802 
Recenzii
Nu există recenzii până acum.