Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Placa PCI Express x4 la 1 port extern + 1 port intern SuperSpeed USB 10 GB/s (USB 3.1, Gen.2) A mama - 89399
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Cablu SATA 6 Gb/s 7 pin mama + alimentare 4 pin tata > Slim SATA 13 pin mama 30 cm - 84848
Cablu USB 3.0 -A-B tata - tata 1m Premium-82756
Rack extern (Carcasa) HDD / SSD SATA 2.5 inch la USB 3.1 Gen 2 - 42587
Cablu USB 3.0 A-B tata - tata 5m Premium - 82759
Cablu SATA 22pin_22pin mama-mama 20cm - 84406
Cablu prelungitor (extensie) SATA 20cm - 84362
Cablu USB 3.0 A - B tata - tata 0.5 m negru - 85065
Kit de montare pentru Raspberry Pi - 18211
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata – mama (5 V + 12 V) 50 cm - 84361
Cablu antena TNC Plug la SMA Plug CFD200 2.5 m pierdere mica - 89506
Placa PCI Express la 2 porturi externe USB 3.0 + 2 porturi interne SATA 6 GB/s - Low Profile Form Factor -89389
Cablu antena TNC Plug la SMA Plug RG-58 C/U 7.5 m - 89508
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in jos 30 cm - 84851
Riser placa Mini PCI Express la PCI Express x 1 insertie stanga 13 cm - 41370
Adaptor M.2 cheie M tata la slot M.2 cheie A - 65699
Cablu antena TNC Plug la SMA Plug CFD200 7.5 m pierdere mica - 89499
Modul Keystone USB 2.0 A mama la USB 2.0 B mama - 86320
Cablu antena TNC Plug la SMA Plug CFD200 5 m pierdere mica - 89505
Cablu antena N Plug la SMA Plug RG-58 A/U 10 m - 89466
Cablu antena TNC Plug la SMA Plug RG-58 C/U 5 m - 89509
Modul Flash mSATA 6 Gb/s 8 GB A19 - 54662
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 2,5 m - 89514
Kit de montare pentru Raspberry Pi 10 mm - 18214
Cablu antena N Plug la RP-SMA Plug 90 grade RG-174 0.3 m - 89579
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853
Cablu antena TNC Plug la SMA Plug RG-58 C/U 2.5 m - 89510
Modul Flash mSATA 6 Gb/s A19 64 GB - 54665
Cablu USB3.0 A tata -B tata 1m - 82580
Placa PCI Expressx1 la 2xPCI 32Bit 5 V cu cablu flexibil 9 cm, insertie stanga-41341
Adaptor M.2 cheie B tata la SATA 7 pin - factor forma 2242 - 62876
Rama de instalare slim SATA 5.25 inch pentru 1 x HDD 2.5 inch SATA - 61993
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 7.5 m - 89512
Memorie DIMM SO-DDR3L 2 GB 1600MHz 1,35 V / 1,5 V Industriala - 55803
Cablu USB3.0 A-B tata-tata - 82434
Adaptor M.2 la 2 x RJ45 Gigabit LAN -40 grade la 85 grade C (PCIe) - 62754 
Recenzii
Nu există recenzii până acum.