Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu USB 3.0 A-B tata - tata 5m Premium - 82759
Cablu USB 3.0 -A-B tata - tata 2m Premium-82757
Cablu antena TNC Plug la SMA Plug CFD200 7.5 m pierdere mica - 89499
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Cablu USB 3.0 A tata - B tata 3m - 82581
Riser placa Mini PCI Express la PCI Express x 1 insertie stanga 13 cm - 41370
Modul Flash IDE 40Pin 512MB Vertical - 54143
Cablu antena SMA jack bulkhead la MHF/ U.FL-LP-068 compatibil plug 50 mm - 89480
Cablu antena N Plug la SMA Plug RG-58 A/U 10 m - 89466
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 2,5 m - 89514
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata – mama (5 V + 12 V) 50 cm - 84361
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Adaptor Sub-D 9 pin tata la Terminal block 6 pin - 65499
Convertor M.2 cheie A+E tata la 1 x RJ45 Gigabit LAN port vertical - 62949
Placa PCI Express la 3 porturi externe USB 3.0 + 1 port extern Gigabit LAN - Low Profile Form Factor - 89382
Panou frontal cu 2 porturi USB 3.0 cu Placa PCI Express - 61775
Adaptor mSATA la M.2 NGFF - 62592
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Cablu USB 3.0 -A-B tata - tata 1m Premium-82756
Cutie Keystone de montare la suprafata cu opt porturi - 86209
Cablu antena TNC Plug la SMA Plug RG-58 C/U 10 m - 89507
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 100 cm - 83804
Cutie Keystone de montare la suprafata cu sase porturi - 86227
Modul Flash IDE 40Pin 2GB Vertical - 54145
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853
Modul SATA 6 Gb/s DOM 32 GB MLC SATA Pin 7 + 8 alimentare intre -40 grade si 85 grade C - 54749
Panou Desktop cu 12 porturi Cat.6A negru - 87676
Adaptor M.2 NGFF cheie B+M tata > M.2 NGFF cheie B slot port saver - 62549
Cablu prelungitor (extensie) SATA 20cm - 84362
Convertor USB 2.0 tata la Serial-TTL 6 fire 1.8 m (3.3 V) - 83117
Modul Keystone RJ45 mama la RJ45 mama Cat.5e - 86204
Adaptor mini USB mama la Terminal Block 6 Pin - 65518
Suport de lampa GX53, unghiular, tip A, argintiu - 46101
Splitter Displayport 1.2 - 1 intrare 1 x mini Displayport la 2 x iesiri HDMI 4K - 87696
Cablu USB3.0 A-B tata-tata - 82434
Adaptor VHDCI-68 pin tata la 4 x DVI 24 +1 mama 22 cm - 65649
Placa PCI Express la 1 port extern USB tip C mama + 1 port extern SuperSpeed USB 10 Gbps (USB 3.1, Gen 2) tip A mama - 89417
Convertor M.2 cheie B+M tata la 1 x USB 3.0 Pin Header - 62842
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama drept 30 cm - 84852
Kit de montare pentru Raspberry Pi 30 mm - 18215
Modul Flash SATA 6 Gb/s 32 GB vertical - 54656
Receptor GPS NL-602U u-blox 6 pe USB - 61840 
Recenzii
Nu există recenzii până acum.