Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 10 cm - 83802
Cablu antena N Plug la RP-SMA Plug 90 grade CFD200 0.3 m pierdere mica - 89578
Modul Flash SATA 6 Gb/s 64 GB MLC Low profile - 54660
Adaptor M.2 NGFF la SATA 7 pin - 62517
Cablu SATA Totul in Unul (All-in-One) - 84230
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84239
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84356
Modul Flash mSATA 6 Gb/s 8 GB A19 - 54662
Convertor M.2 cheie B+M tata la 1 x USB 3.0 Pin Header - 62842
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama drept 30 cm - 84852
Cablu prelungitor (extensie) SATA 20cm - 84362
Adaptor Micro USB tata la Terminal Block 6 Pin - 65597
Cablu antena N Plug la RP-SMA Plug 90 grade RG-174 0.3 m - 89579
Rack extern (Carcasa) HDD SATA 2.5 inch la Multiport SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) - 42554
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Modul Keystone RJ45 mama la RJ45 mama Cat.5e - 86204
Placa PCI Express x4 la 1 port extern + 1 port intern SuperSpeed USB 10 GB/s (USB 3.1, Gen.2) A mama - 89399
Switch VGA 4 porturi cu audio manual - 87636
Cablu antena TNC Plug la SMA Plug RG-58 C/U 7.5 m - 89508
Cablu USB 3.0 A - B tata - tata 0.5 m negru - 85065
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in jos 30 cm - 84851
Receptor GPS NL-82001UOG OTG Multi GNSS UDR u-blox NEO-M8U 1.5 m pe Micro USB 2.0 - 62873 
Recenzii
Nu există recenzii până acum.