Description
The MD6 serial multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-82022MP GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: MD6 Navilock plug (USB or serial cable are optional available)
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 – 48 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• MD6 connection cable
Package content
• MD6 serial receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Hub Raspberry Pi USB Micro-B mama/USB pin header la 4 x USB A mama - 62650
Patch panel 19 inch cu 24 porturi Cat.6 0.5 U negru - 43316
Cablu USB3.0 A tata -B tata 1m - 82580
Riser Placa Mini PCI Express la PCI 32 Bit / 5 V insertie stanga-41359
Cablu antena N Plug la RP-SMA Plug 90 grade RG-174 0.3 m - 89579
Switch VGA 4 porturi manual bidirectional - 87635
Cablu SATA 6 Gb/s 7 pin mama + alimentare 4 pin tata > Slim SATA 13 pin mama 30 cm - 84848
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 2,5 m - 89514
Convertor Raspberry Pi USB Micro-B mama / USB Pin Header la Compact Flash - 62625
Cablu SATA Totul in Unul (All-in-One) - 84230
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84239
Cablu antena RP-SMA jack bulkhead la MHF/ U.FL-LP-068 compatibil plug 100 mm lungime filet 10 mm - 89471
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in jos 30 cm - 84854
Modul Keystone F mama la F mama - 86300
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 100 cm - 83804
Modul Keystone RJ45 mama la RJ45 mama Cat.6 - 86210
Receptor GPS pe USB 2.0 NL-8012U Multi GNSS u-blox 8 4.5 m - 62524 
Recenzii
Nu există recenzii până acum.