Description
The MD6 serial multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-82022MP GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: MD6 Navilock plug (USB or serial cable are optional available)
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 – 48 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• MD6 connection cable
Package content
• MD6 serial receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Hub Raspberry Pi USB Micro-B mama/USB pin header la 4 x USB A mama - 62650
Receptor GPS NL-82002U Multi GNSS UDR u-blox NEO-M8U 1.5 m pe USB 2.0 - 62756
Modul Flash SATA 3 Gb/s 2 GB vertical/ low profile - 54368
Cablu USB3.0 A tata -B tata 1m - 82580
Cablu USB 3.0 A tata - B tata 3m - 82581
Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-068 compatibil Plug 100 mm lungime filet 9 mm rezistent la stropire - 89482
Antena cablu SMA Jack Bulkhead > MHF/U.FL compatibil Plug 200 mm - 88419
Receptor GPS NL-8044P Multi GNSS u-blox 8 10 m, pe serial MD6 PPS - 62528
Cablu antena TNC Plug la SMA Plug RG-58 C/U 2.5 m - 89510
Adaptor VHDCI-68 pin tata la 4 x VGA mama 22 cm - 65647
Cablu antena TNC Plug la SMA Plug CFD200 7.5 m pierdere mica - 89499
Placa PCI Express - 2x USB 3.0 - 89243
Cablu USB3.0 A-B tata-tata - 82434
Modul Keystone RJ45 jack la LSA Cat.6A - 86205
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 100 cm - 83804
Adaptor mSATA la M.2 NGFF - 62592
Adapter M.2 Key M male > M.2 Key E slot - 65831
Stick USB 2.0 Dual Band WLAN ac/a/b/g/n Stick 433 Mbps cu antena externa - 12462
Convertor Raspberry Pi USB Micro-B mama / USB pin header la mSATA 6 Gb/s - 62648
Convertor 2.5 inch U.2 SFF-8639 la M.2 NGFF NVMe Key M - 62710
Cablu USB 3.0 -A-B tata - tata 2m Premium-82757
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853
Cablu USB 3.0 A - B tata - tata 5m albastru - 82582
Kit de montare pentru Raspberry Pi 30 mm - 18215
Riser placa Mini PCI Express la 2 x PCI 32 Bit 5 V cu cablu flexibil 13 cm insertie stanga - 41355
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 10 cm - 83802
Kit de montare cu distantiere M2.5 hexagonale interior/interior 30 mm pentru Raspberry Pi - 18220
Panou 10 inch pentru organizarea cablurilor gri - 43341
Cablu SATA 22pin_22pin mama-mama 20cm - 84406 
Recenzii
Nu există recenzii până acum.