Description
The MD6 serial multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-82022MP GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: MD6 Navilock plug (USB or serial cable are optional available)
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 – 48 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• MD6 connection cable
Package content
• MD6 serial receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cititor de carduri pe micro USB cu OTG + USB A tata - 91731
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Cablu USB 3.0 A - B tata - tata 0.5 m negru - 85065
Cablu SATA Totul in Unul (All-in-One) - 84230
Cablu antena TNC Plug la SMA Plug RG-58 C/U 2.5 m - 89510
Cablu USB 3.0 A tata - B tata 3m - 82581
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Cablu prelungitor (extensie) SATA 20cm - 84362
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 100 cm - 83804
Modul SATA 6 Gb/s DOM 32 GB MLC SATA Pin 7 + 8 alimentare intre -40 grade si 85 grade C - 54749
Placa PCI Express cu 1 x port exterior si 1 x port interior pe USB 3.0 - 89273
Cablu USB 3.0 -A-B tata - tata 1m Premium-82756
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama drept 30 cm - 84852
Switch HDMI UHD 3 x HDMI intrare la 1 x HDMI iesire 4K cu cablu integrat 50 cm - 18600
Cablu antena TNC Plug la SMA Plug CFD200 10 m pierdere mica - 89498
Cablu antena N Plug la SMA Plug cu doua conductoare RG-58 A/U 10 m - 89468
Cablu antena SMA Jack Bulkhead > MHF/U.FL compatibil Plug 500 mm - 88418
Cablu USB3.0 A tata -B tata 1m - 82580
Receptor GPS pe Mini USB 2.0 NL-8005U Multi GNSS u-blox 8 1.5 m - 62578
Placa PCI Express cu 2 porturi USB 3.0 - 89241
Rama de instalare slim SATA 5.25 inch pentru 1 x HDD 2.5 inch SATA - 61993
Receptor GPS MT3337 NL-650US pe micro USB - 60134 
Recenzii
Nu există recenzii până acum.