Description
The MD6 serial multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-82022MP GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: MD6 Navilock plug (USB or serial cable are optional available)
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 – 48 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• MD6 connection cable
Package content
• MD6 serial receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Receptor GPS NL-8044P Multi GNSS u-blox 8 10 m, pe serial MD6 PPS - 62528
Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-068 compatibil Plug 100 mm lungime filet 9 mm rezistent la stropire - 89482
Convertor Raspberry Pi USB Micro-B mama / USB pin header la mSATA 6 Gb/s - 62648
Placa PCI Express cu 2 x USB 3.0 - 89356
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in jos 30 cm - 84854
Cablu antena N Plug la RP-SMA Plug 90 grade CFD200 0.3 m pierdere mica - 89578
Cablu USB 3.0 A-B tata - tata 5m Premium - 82759
Cablu antena N plug la SMA plug CFD200 15 m pierdere mica - 89516
Cablu antena N Plug la SMA Plug cu doua conductoare RG-58 A/U 10 m - 89468
Adaptor Raspberry Pi GPIO Pin Header la Serial RS-232 - 65628
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Receptor GPS NL-82004U Multi GNSS UDR u-blox NEO-M8U 4.5 m pe USB 2.0 - 62779 
Recenzii
Nu există recenzii până acum.