Description
The MD6 serial multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-82022MP GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: MD6 Navilock plug (USB or serial cable are optional available)
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 – 48 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• MD6 connection cable
Package content
• MD6 serial receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu antena TNC Plug la SMA Plug CFD200 10 m pierdere mica - 89498
Adaptor M.2 NGFF la SATA 7 pin - 62517
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Convertor M.2 cheie B+M tata la 2 x USB 3.0 Pin Header - 62843
Convertor U.2 SFF-8639 la M.2 NGFF NVMe Key M - 62696
Rack extern (carcasa) M.2 SSD 42 mm la SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Tip C mama - 42572
Cablu USB TTL tata la stereo jack 3.5 mm 4 pin tata 1.8m (5 V) - 83778
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Convertor M.2 cheie A+E tata la 1 x slot Mini PCIe half size / full size cu cablu flexibil - 62848
Memorie Flash Mini PCIe mSATA 6 GB/s 8 GB intre -40 si +85 grade - 54705
Riser placa PCI Express x16 BTX, insertie dreapta - 41788
Kit de montare pentru Raspberry Pi 30 mm - 18215
Cablu USB 3.0 A-B tata - tata 5m Premium - 82759
Cablu USB3.0 A tata -B tata 1m - 82580
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Placa PCI Expressx1 la 2xPCI 32Bit 5 V cu cablu flexibil 9 cm, insertie stanga-41341
Rama instalare aluminiu de la 2.5 inch la 3.5 inch albastra - 21291
Cablu prelungitor (extensie) SATA 20cm - 84362
Hub Raspberry Pi USB Micro-B mama/USB pin header la 4 x USB A mama - 62650
Receptor GPS NL-82004U Multi GNSS UDR u-blox NEO-M8U 4.5 m pe USB 2.0 - 62779
Cablu antena N plug la SMA plug cu doua conductoare RG-58 A/U 5 m - 89467
Cablu USB 3.0 A - B tata - tata 0.5 m negru - 85065 
Recenzii
Nu există recenzii până acum.