Description
The MD6 serial multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-82022MP GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: MD6 Navilock plug (USB or serial cable are optional available)
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 – 48 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• MD6 connection cable
Package content
• MD6 serial receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Placa PCI Express cu 5 porturi externe + 2 porturi interne USB 3.0 - 89355
Cablu USB3.0 A-B tata-tata - 82434
Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-068 compatibil Plug 100 mm lungime filet 9 mm rezistent la stropire - 89482
Cablu antena SMA Jack Bulkhead > MHF/U.FL compatibil Plug 500 mm - 88418
Cablu antena TNC Plug la SMA Plug CFD200 7.5 m pierdere mica - 89499
Cablu USB 3.0 A - B tata - tata 0.5 m negru - 85065
Placa PCI Express la 2 porturi externe USB 3.0 + 2 porturi interne SATA 6 GB/s - Low Profile Form Factor -89389
Cablu antena SMA jack bulkhead la MHF/ U.FL-LP-068 compatibil plug 50 mm - 89480
Cablu antena TNC Plug la SMA Plug RG-58 C/U 7.5 m - 89508
Kit de montare pentru Raspberry Pi 30 mm - 18215
Splitter Displayport 1.2 - 1 intrare mini Displayport la 2 iesiri Displayport 4K - 87695
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Cablu antena N plug la SMA plug CFD200 15 m pierdere mica - 89516
Cablu antena RP-SMA jack bulkhead la MHF/ U.FL-LP-068 compatibil plug 100 mm lungime filet 10 mm - 89471
Cablu antena TNC Plug la SMA Plug CFD200 10 m pierdere mica - 89498
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in jos 30 cm - 84851
Cablu USB 3.0 -A-B tata - tata 2m Premium-82757
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84356
Rama de instalare Slim SATA 5.25 inch pentru 1 x HDD 2.5 inch SATA HDD cu max. 9.5 mm - 62669
Placa PCI Express Card cu 3 x porturi externe si 1 port intern pe USB 3.0-89301
Modul Keystone USB 2.0 A mama la USB 2.0 A mama - 86317
Cablu SATA 22pin_22pin mama-mama 20cm - 84406
Cablu SATA Totul in Unul (All-in-One) - 84230
Modul SP DOM SATA 6 Gb/s 128 GB MLC - 54658
Cablu USB3.0 A tata -B tata 1m - 82580
Cablu prelungitor (extensie) SATA 20cm - 84362
Adaptor M.2 cheie M tata la slot M.2 cheie A - 65699
Antena cablu SMA Jack Bulkhead > MHF/U.FL compatibil Plug 200 mm - 88419
Cablu USB 3.0 A - B tata - tata 5m albastru - 82582
Placa PCI Express cu 4 porturi USB 3.0 - 89360
Receptor GPS serial MD6 PPS Multi GNSS NL-8004P u-blox 8 5 m - 62527
Adaptor PS/2 mama > USB-A tata - 65461
Adaptor DC 5.5 x 2.1 mm tata la Terminal Block cu buton de comanda 2 pin - 65523
Cablu USB 3.0 A-B tata - tata 5m Premium - 82759
Cablu antena TNC Plug la SMA Plug RG-58 C/U 5 m - 89509
Riser Placa Mini PCI Express - la PCI Express, insertie stanga-41305
Receptor GPS serial MD6 NL- 603P - 61841 
Recenzii
Nu există recenzii până acum.