Description
The MD6 serial multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-82022MP GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: MD6 Navilock plug (USB or serial cable are optional available)
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 – 48 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• MD6 connection cable
Package content
• MD6 serial receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu USB 3.0 -A-B tata - tata 1m Premium-82756
Modul Flash SATA 6 Gb/s 32 GB vertical - 54656
Adaptor DC 5.5 x 2.1 mm mama la Terminal Block cu buton de comanda 2 pin - 65524
Cititor carduri USB 3.0 All in 1 - 91705
Placa riser minare PCI Express x1 > x16, cablu USB 60 cm, alimentare 4 pin - 41423
Adaptor 3.5 inch 4 X SATA 7 pin > 4 X M.2 NGFF - 62574
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853
Cablu antena RP-SMA jack bulkhead la MHF/ U.FL-LP-068 compatibil plug 100 mm lungime filet 10 mm - 89471
Riser Placa Mini PCI Express la PCI 32 Bit / 5 V insertie stanga-41359
Modul Flash IDE 44Pin 2GB vertical - 54155
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Placa PCI Express cu 2 x porturi externe USB 3.0 si 1 x port intern USB 3.0 - 89315
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84239
Cablu antena TNC Plug la SMA Plug RG-58 C/U 7.5 m - 89508
Cablu SATA 6 Gb/s 7 pin mama + alimentare 4 pin tata > Slim SATA 13 pin mama 30 cm - 84848
Rama instalare aluminiu de la 2.5 inch la 3.5 inch albastra - 21291
10 inch Wallmount Rack 1 U - 43303
Adaptor RJ45 mama / mama Cat.6 compact UTP - 86249
Receptor GPS pe USB 2.0 NL-802M2U Multi GNSS u-blox 8 4.5 m - 62532
Adaptor M.2 la 2 x RJ45 Gigabit LAN -40 grade la 85 grade C (PCIe) - 62754
Cablu antena N Plug la RP-SMA Plug 90 grade RG-174 0.3 m - 89579
Placa PCI Express cu 4 porturi USB 3.0-89297
Adaptor VHDCI-68 pin tata > 4 x HDMI mama 20 cm - 65648
Placa PCI Expressx1 la 2xPCI 32Bit 5 V cu cablu flexibil 9 cm, insertie stanga-41341
Adaptor VHDCI-68 pin tata la 4 x VGA mama 22 cm - 65647
Modul Flash mSATA 6 Gb/s A19 64 GB - 54665
Adaptor VHDCI-68 pin tata la 4 x DVI 24 +1 mama 22 cm - 65649
Kit de montare pentru Raspberry Pi 10 mm - 18214
Convertor M.2 cheie A+E tata la 1 x slot Mini PCIe half size / full size cu cablu flexibil - 62848
Hub Raspberry Pi USB Micro-B mama/USB pin header la 4 x USB A mama - 62650
Cablu antena N Plug la SMA Plug cu doua conductoare RG-58 A/U 10 m - 89468
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Modul Flash IDE 40Pin 1GB Vertical - 54144
Suport de lampa GX53, rotund, tip E, argintiu - 46279
Convertor Raspberry Pi USB Micro-B mama / USB Pin Header la SATA 7 Pin - 62626
Cablu antena TNC Plug la SMA Plug CFD200 7.5 m pierdere mica - 89499
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in jos 30 cm - 84851
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Cablu antena TNC Plug la SMA Plug RG-58 C/U 10 m - 89507
Convertor Raspberry Pi USB Micro-B mama / USB pin header la mSATA 6 Gb/s - 62648
Cablu prelungitor (extensie) SATA 20cm - 84362
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in jos 30 cm - 84854
Convertor M.2 cheie B+M tata la 1 x USB 3.0 Pin Header - 62842
Adaptor M.2 NGFF la SATA 7 pin - 62548
Memorie Flash Mini PCIe mSATA 6 GB/s 8 GB intre -40 si +85 grade - 54705
Adapter M.2 Key M male > M.2 Key E slot - 65831
Patch Panel Desktop cu 8 porturi Cat.6 gri - 87680
Panou 10 inch cu 12 porturi Cat.6 negru - 43297
Adaptor M.2 NGFF M tata la PCI Express x 4 slot-uri - 62584
Cablu antena N plug la SMA plug CFD200 15 m pierdere mica - 89516
Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-68 compatibil Plug 350 mm 1.13 lungime filet 10 mm - 88417 
Recenzii
Nu există recenzii până acum.