Description
The MD6 serial multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-82022MP GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: MD6 Navilock plug (USB or serial cable are optional available)
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 – 48 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• MD6 connection cable
Package content
• MD6 serial receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu USB 3.0 A tata - B tata 3m - 82581
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Adaptor M.2 NGFF M tata la PCI Express x 4 slot-uri - 62584
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 10 cm - 83802
Cablu antena RP-SMA jack bulkhead la MHF/ U.FL-LP-068 compatibil plug 100 mm lungime filet 10 mm - 89471
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 100 cm - 83804
Cablu prelungitor (extensie) SATA 20cm - 84362
Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-68 compatibil Plug 350 mm 1.13 lungime filet 10 mm - 88417
Cablu USB 3.0 A - B tata - tata 5m albastru - 82582
Adaptor PS/2 mama > USB-A tata - 65461
Convertor M.2 cheie B+M tata la 1 x USB 3.0 Pin Header - 62842
Adaptor VHDCI-68 pin tata la 4 x DVI 24 +1 mama 22 cm - 65649
Placa riser minare PCI Express x1 > x16, cablu USB 60 cm, alimentare SATA - 41426
Cablu USB 3.0 A-B tata - tata 5m Premium - 82759
Cablu USB 3.0 -A-B tata - tata 1m Premium-82756
Adaptor VHDCI-68 pin tata la 4 x VGA mama 22 cm - 65647
Placa PCI Express x4 cu 4 porturi externe USB 3.0 Quad Channel - 89365
Cablu antena N Plug la RP-SMA Plug 90 grade CFD200 0.3 m pierdere mica - 89578
Panou 10 inch cu 12 porturi Cat.6 negru - 43297
Hub extern USB 3.1 Gen 1 Tip C la 3 x USB Tip A + 2 sloturi cititor card SD negru - 62900
Modul Flash SATA 6 Gb/s 32 GB vertical - 54656
Cablu USB 3.0 -A-B tata - tata 2m Premium-82757
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Priza de perete cu 2 porturi RJ45 Cat.6 - 86269
Switch RJ11 2 porturi manual bidirectional - 87698
Modul Flash IDE 40Pin 4GB Vertical - 54146
Cablu antena TNC Plug la SMA Plug RG-58 C/U 5 m - 89509
Adaptor Raspberry Pi GPIO Pin Header la Serial RS-232 - 65628
Panou 19 inch cu 24 porturi Cat.6A gri - 43319
Cablu USB3.0 A tata -B tata 1m - 82580
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Convertor Digital Audio Coaxial la TOSLINK - 62790
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84239
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama drept 30 cm - 84852
Convertor M.2 cheie A+E tata la 1 x slot Mini PCIe half size / full size cu cablu flexibil - 62848
Panou 19 inch cu 24 porturi Cat.6 gri - 43300
Rama de instalare slim SATA 5.25 inch pentru 1 x HDD 2.5 inch SATA - 61993
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata – mama (5 V + 12 V) 50 cm - 84361
Riser Placa Mini PCI Express la PCI 32 Bit / 5 V insertie stanga-41359
Cablu antena TNC Plug la SMA Plug RG-58 C/U 2.5 m - 89510
Cablu USB3.0 A-B tata-tata - 82434
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84356
Panou Desktop cu 12 porturi Cat.6A alb - 87679
Convertor Raspberry Pi USB Micro-B mama / USB pin header la mSATA 6 Gb/s - 62648
Modul M.2 cheie A+E tata la WLAN 11ac/a/b/g/n + Bluetooth 4.0 - 95254
Kit de montare pentru Raspberry Pi 30 mm - 18215
Placa PCI Express cu 2 x USB 3.0 - 89356
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in jos 30 cm - 84851
Cablu antena TNC Plug la SMA Plug CFD200 7.5 m pierdere mica - 89499
Placa PCI Express cu 2 x Serial RS-232 + 1 x Paralel - 89556 
Recenzii
Nu există recenzii până acum.