Description
The MD6 serial multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-82022MP GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: MD6 Navilock plug (USB or serial cable are optional available)
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 – 48 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• MD6 connection cable
Package content
• MD6 serial receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Priza de perete Keystone cu 2 porturi compact - 86219
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Adaptor 3.5 inch 4 X SATA 7 pin > 4 X M.2 NGFF - 62574
Cablu SATA 22pin_22pin mama-mama 20cm - 84406
Cablu SATA pentru 2x HDD Totul in Unul (All-in-One) - 84356
Cablu SATA 6 Gb/s 7 pin mama + alimentare 4 pin tata > Slim SATA 13 pin mama 30 cm - 84848
Cablu USB3.0 A tata -B tata 1m - 82580
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in jos 30 cm - 84854
Cablu USB 3.0 -A-B tata - tata 1m Premium-82756
Cablu USB 3.0 A - B tata - tata 5m albastru - 82582
Convertor USB 2.0 tata la Serial - TTL 3.5 mm stereo jack 1.8 m (3.3V) - 83114
Modul Flash IDE 44Pin 2GB vertical - 54155
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama drept 30 cm - 84852
Cablu antena N Plug la SMA Plug cu doua conductoare RG-58 A/U 10 m - 89468
Rack extern (carcasa) 2 x SSD M.2 cheie B la USB 3.1 Gen 2 USB Tip C mama cu RAID - 42589
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853
Panou Desktop cu 12 porturi Cat.6A negru - 87676
Cablu USB 3.0 A-B tata - tata 5m Premium - 82759
Cablu USB 3.0 A tata - B tata 3m - 82581
Cablu antena SMA Jack Bulkhead > MHF/U.FL compatibil Plug 500 mm - 88418
Modul Keystone BNC mama la BNC mama - 86301
Adaptor Audio Cinch Jack > BNC Plug - 84838
Cablu RJ45 Cat.6 SSTP unghi / drept 2 m - 83526
Priza de perete cu 1 port RJ45 Cat. 6 compact UTP - 86248
Cablu antena N Plug la SMA Plug RG-58 A/U 10 m - 89466
Adaptor PS/2 mama > USB-A tata - 65461
Adaptor BNC mama la Terminal Block cu buton de comanda 2 pin - 65526
HUB USB 2.0 extern cu 4 porturi - 61393
Kit de montare pentru Raspberry Pi 10 mm - 18214
Convertor M.2 cheie B+M tata la Hibrid 4 x SATA 7 pin tata cu RAID - 62850
Cablu antena TNC Plug la SMA Plug CFD200 2.5 m pierdere mica - 89506
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata – mama (5 V + 12 V) 50 cm - 84361
Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-068 compatibil Plug 100 mm lungime filet 9 mm rezistent la stropire - 89482
Cablu antena TNC Plug la SMA Plug RG-58 C/U 7.5 m - 89508
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Panou de cuplare dimensiune 19 inch cu 24 porturi Cat.6 - 43295
Convertor M.2 cheie B+M tata la 1 x USB 3.0 Pin Header - 62842
Placa PCI Express cu 2 x USB 3.0 - 89356 
Recenzii
Nu există recenzii până acum.