Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82022MU GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu USB 3.0 A - B tata - tata 5m albastru - 82582
Cablu antena TNC Plug la SMA Plug RG-58 C/U 2.5 m - 89510
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Cablu USB 3.0 A tata - B tata 3m - 82581
Cablu USB 3.0 A-B tata - tata 5m Premium - 82759
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 10 cm - 83802
Kit de montare pentru Raspberry Pi 30 mm - 18215
Receptor GPS GNSS NL-6002U u-blox NEO-6P pe USB -62456
Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-068 compatibil Plug 100 mm lungime filet 9 mm rezistent la stropire - 89482
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 2,5 m - 89514
Cablu SATA Totul in Unul (All-in-One) - 84230
Receptor GPS pe USB 2.0 NL-802M2U Multi GNSS u-blox 8 4.5 m - 62532
Adaptor PS/2 mama > USB-A tata - 65461
Convertor M.2 cheie A+E tata la 1 x RJ45 Gigabit LAN port vertical - 62949
Patch Panel Desktop cu 12 porturi Cat.6 negru - 87296
Cablu antena N plug la SMA plug cu doua conductoare RG-58 A/U 5 m - 89467
Cablu USB3.0 A-B tata-tata - 82434
Cablu antena TNC Plug la SMA Plug CFD200 5 m pierdere mica - 89505
Adaptor M.2 cheie B tata la SATA 7 pin - factor forma 2242 - 62876
Cablu USB 3.0 -A-B tata - tata 1m Premium-82756
Cablu antena TNC Plug la SMA Plug RG-58 C/U 7.5 m - 89508
Cablu USB 3.0 -A-B tata - tata 2m Premium-82757
Adaptor VHDCI-68 pin tata > 4 x HDMI mama 20 cm - 65648 
Recenzii
Nu există recenzii până acum.