Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Kit de montare cu distantiere M2.5 hexagonale interior/interior 10 mm pentru Raspberry Pi - 18218
Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-68 compatibil Plug 350 mm 1.13 lungime filet 10 mm - 88417
Cablu antena N Plug la SMA Plug cu doua conductoare RG-58 A/U 10 m - 89468
Cablu antena N plug la SMA plug CFD200 15 m pierdere mica - 89516
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Cablu USB3.0 A tata -B tata 1m - 82580
Cablu antena N Plug la RP-SMA Plug 90 grade CFD200 0.3 m pierdere mica - 89578
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 10 cm - 83802
Cablu prelungitor (extensie) SATA 20cm - 84362
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 100 cm - 83804
Cablu USB 3.0 A tata - B tata 3m - 82581
Cablu USB3.0 A-B tata-tata - 82434
Hub cu 3 porturi USB 3.0 + 1 Port Gigabit LAN 10/100/1000 Mb/s - 62431
Cablu antena TNC Plug la SMA Plug CFD200 2.5 m pierdere mica - 89506
Placa PCI Express la 2 porturi externe USB 3.0 + 2 porturi interne SATA 6 GB/s - Low Profile Form Factor -89389
Adaptor VHDCI-68 pin tata la 4 x VGA mama 22 cm - 65647
Modul Flash IDE 40Pin 512MB Vertical - 54143
Cablu antena N Plug la RP-SMA Plug 90 grade RG-174 0.3 m - 89579
Cablu SATA Totul in Unul (All-in-One) - 84230
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 2,5 m - 89514
Cablu antena TNC Plug la SMA Plug RG-58 C/U 10 m - 89507
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama unghi in sus 30 cm - 84853
Cablu USB 3.0 -A-B tata - tata 1m Premium-82756
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama drept 30 cm - 84852
Placa PCI Express x4 cu 1 port extern USB Tip C mama + 1 port extern USB 3.1 Gen 2 Tip A mama - 89562
Convertor Raspberry Pi USB Micro-B mama / USB Pin Header la Compact Flash - 62625
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Receptor GPS NL-8044P Multi GNSS u-blox 8 10 m, pe serial MD6 PPS - 62528 
Recenzii
Nu există recenzii până acum.