Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Modul Keystone HDMI mama la HDMI mama - 86316
Cablu SATA 6 Gb/s 7 pin mama + alimentare 4 pin tata > Slim SATA 13 pin mama 30 cm - 84848
Placa conectori (Slot Bracket ) la 1 x Serial, 1 x Paralel - 83445
Cablu USB 3.0 A - B tata - tata 0.5 m negru - 85065
Kit de montare pentru Raspberry Pi 30 mm - 18215
Convertor Raspberry Pi USB Micro-B mama / USB pin header la mSATA 6 Gb/s - 62648
Cablu USB3.0 A-B tata-tata - 82434
Cablu prelungitor (extensie) SATA 20cm - 84362
Cablu antena TNC Plug la SMA Plug CFD200 7.5 m pierdere mica - 89499
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 7.5 m - 89512
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Splitter 3G-SDI 1 intrare si 8 iesiri - 93253
Cablu antena N Plug la RP-SMA Plug 90 grade CFD200 0.3 m pierdere mica - 89578
Cablu antena TNC Plug la SMA Plug RG-58 C/U 2.5 m - 89510
Cablu USB3.0 A tata -B tata 1m - 82580
Cablu antena TNC Plug la SMA Plug RG-58 C/U 10 m - 89507
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 10 cm - 83802
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 100 cm - 83804
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Adaptor M.2 NGFF cheie B+M tata > M.2 NGFF cheie B slot port saver - 62549
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata – mama (5 V + 12 V) 50 cm - 84361
Cablu antena TNC Plug la SMA Plug RG-58 C/U 5 m - 89509
Adaptor mSATA la M.2 NGFF - 62592
Adaptor VHDCI-68 pin tata > 4 x HDMI mama 20 cm - 65648
Adaptor M.2 cheie B tata la SATA 7 pin - factor forma 2242 - 62876
Modul Flash mSATA 6 Gb/s 16 GB - 54663
Receptor GPS pe USB 2.0 NL-8004U Multi GNSS Receiver u-blox 8 4.5 m - 62531 
Recenzii
Nu există recenzii până acum.