Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82022MU GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata – mama (5 V + 12 V) 50 cm - 84361
Adaptor PS/2 mama > USB-A tata - 65461
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama drept 30 cm - 84852
Duplicator porturi RJ45 - 1 RJ45 tata la 2 RJ45 mama (1x Ethernet, 1x ISDN) - 65441
Adaptor Raspberry Pi GPIO Pin Header la Serial RS-232 - 65628
Cablu antena TNC Plug la SMA Plug CFD200 7.5 m pierdere mica - 89499
Cablu antena TNC Plug la SMA Plug CFD200 2.5 m pierdere mica - 89506
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758
Adaptor M.2 NGFF la SATA 7 pin - 62548
Antena cablu SMA Jack Bulkhead > MHF/U.FL compatibil Plug 200 mm - 88419
Cablu SATA 6 Gb/s 7 pin mama + alimentare 4 pin tata > Slim SATA 13 pin mama 30 cm - 84848
Cablu USB 3.0 A - B tata - tata 0.5 m negru - 85065
Convertor Raspberry Pi USB Micro-B mama / USB Pin Header la Compact Flash - 62625
Placa PCI Express cu 2 x Serial RS-232 + 1 x Paralel - 89556
Placa PCI Express cu 4 x Serial RS-232 - 89557
Cablu USB 3.0 -A-B tata - tata 2m Premium-82757
Adaptor Audio Cinch Jack > BNC Plug - 84838
Cablu SATA Totul in Unul (All-in-One) - 84230
Receptor GPS pe USB 2.0 NL-8004U Multi GNSS Receiver u-blox 8 4.5 m - 62531 
Recenzii
Nu există recenzii până acum.