Description
The USB 2.0 Multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82022MU GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: USB 2.0 Type-A male
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 4.5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• PC or laptop with a free USB Type-A port
• For devices with OTG function and optional OTG adapter: Windows 10
Package content
• USB 2.0 receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Receptor GPS pe USB 2.0 NL-8002U Multi GNSS Receiver u-blox 8 1.5 m - 62523
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 7.5 m - 89512
Cablu USB 3.0 A - B tata - tata 0.5 m negru - 85065
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V + 12 V) > SATA 22 pin mama drept 30 cm - 84852
Cablu USB 3.0 A tata - B tata 3m - 82581
Cablu USB3.0 A-B tata-tata - 82434
Cablu antena TNC Plug la SMA Plug RG-58 C/U 2.5 m - 89510
Riser Placa Mini PCI Express la PCI 32 Bit / 5 V insertie stanga-41359
Kit de montare pentru Raspberry Pi 10 mm - 18214
Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-068 compatibil Plug 100 mm lungime filet 9 mm rezistent la stropire - 89482
Cablu antena SMA Jack Bulkhead la MHF /U.FL-LP-68 compatibil Plug 350 mm 1.13 lungime filet 10 mm - 88417
Riser placa PCI in unghi de 90 grade insertie stanga cu cablu de 13 cm - 41779
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Cablu USB 3.0 -A-B tata - tata 2m Premium-82757
Cablu antena RP-SMA Jack Bulkhead la MHF / U.FL-LP-068 compatibil Plug 100 mm 1.13 lungime filet 9 mm rezistenta la stropire - 89584
Modul Flash mSATA 6 Gb/s 16 GB - 54663
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata - mama (5 V + 12 V) 30 cm - 83803
Cablu antena N Plug la RP-SMA Plug 90 grade RG-174 0.3 m - 89579
Cablu antena TNC Plug la SMA Plug RG-58 C/U 5 m - 89509
Cablu USB 3.0 A - B tata - tata 5m albastru - 82582
Adaptor VHDCI-68 pin tata la 4 x DVI 24 +1 mama 22 cm - 65649
Cablu antena N Plug la SMA Plug RG-58 A/U 10 m - 89466 
Recenzii
Nu există recenzii până acum.