Description
The MD6 serial multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-82022MP GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: MD6 Navilock plug (USB or serial cable are optional available)
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 – 48 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• MD6 connection cable
Package content
• MD6 serial receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Cablu USB 3.0 A-B tata - tata 5m Premium - 82759
Cablu USB 3.0 -A-B tata - tata 2m Premium-82757
Cablu antena TNC Plug la SMA Plug CFD200 7.5 m pierdere mica - 89499
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Cablu USB 3.0 A tata - B tata 3m - 82581
Riser placa Mini PCI Express la PCI Express x 1 insertie stanga 13 cm - 41370
Modul Flash IDE 40Pin 512MB Vertical - 54143
Cablu antena SMA jack bulkhead la MHF/ U.FL-LP-068 compatibil plug 50 mm - 89480
Cablu antena N Plug la SMA Plug RG-58 A/U 10 m - 89466
Cablu antena RP-TNC Plug la SMA Plug RG-58 C/U 2,5 m - 89514
Cablu prelungitor (extensie) SATA 6 Gb/s 22 pin tata – mama (5 V + 12 V) 50 cm - 84361
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama drept 30 cm - 84849
Adaptor Sub-D 9 pin tata la Terminal block 6 pin - 65499
Convertor M.2 cheie A+E tata la 1 x RJ45 Gigabit LAN port vertical - 62949
Placa PCI Express la 3 porturi externe USB 3.0 + 1 port extern Gigabit LAN - Low Profile Form Factor - 89382
Panou frontal cu 2 porturi USB 3.0 cu Placa PCI Express - 61775
Adaptor mSATA la M.2 NGFF - 62592
Cablu USB 3.0 -A-B tata - tata 3m Premium - 82758 
Recenzii
Nu există recenzii până acum.