Description
The MD6 serial multi GNSS UDR receiver based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-82022MP GNSS receiver is especially designed for installation on a white ground (camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Note
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!
Specification
• Connector: MD6 Navilock plug (USB or serial cable are optional available)
• Chipset: u-blox NEO-M8U
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Supports UDR from NMEA 4.1
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6
• Update rate: up to 20 Hz
• Sensibility max. -160 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 – 48 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 5 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• MD6 connection cable
Package content
• MD6 serial receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual
Package
• Retail Box
Garantie: 12 luni

Convertor M.2 cheie B+M tata la 2 x USB 3.0 Pin Header - 62843
Cititor de carduri 20 in 1 pe USB 2.0 - 91667
Curele prindere cabluri L 150 mm x W 12 mm 10 buc negru - 18686
Incarcator 1 x USB tip A cu Qualcomm Quick Charge 3.0 negru - 62968
Cititor carduri 3.5 inch pe USB 3.0 63 in 1- 91725
Adaptor M.2 NGFF cheie B+M tata > M.2 NGFF cheie B slot port saver - 62549
Adaptor VHDCI-68 pin tata la 4 x DVI 24 +1 mama 22 cm - 65649
Adaptor M.2 cheie B tata la SATA 7 pin - factor forma 2242 - 62876
Cablu USB 3.0 A - B tata - tata 0.5 m negru - 85065
Adaptor 3.5 inch 4 X SATA 7 pin > 4 X M.2 NGFF - 62574
Cablu SATA 6 Gb/s 7 pin mama + Floppy 4 pin alimentare mama (5 V) la SATA 22 pin mama unghi in sus 30 cm - 84850
Adaptor VHDCI-68 pin tata > 4 x HDMI mama 20 cm - 65648
Convertor U.2 SFF-8639 la M.2 NGFF NVMe Key M - 62696
Modul SP DOM SATA 6 Gb/s 128 GB MLC - 54658
Adaptor M.2 NGFF la SATA 7 pin - 62548
Cablu USB 3.0 A - B tata - tata 5m albastru - 82582
Modul Flash SATA 6 Gb/s 2 GB vertical SLC - 54351
Convertor Raspberry Pi USB Micro-B mama / USB Pin Header la SATA 7 Pin - 62626
Incarcator 1 x USB tip A cu Qualcomm Quick Charge 3.0 alb - 62969 
Recenzii
Nu există recenzii până acum.